Basics
The following components are considered basic building blocks in most designs, and are commonly used as connectors.
These building blocks are parametric cells whose input parameters can be arbitrary values entered by the user.
Straight/Tapered waveguide
Conventional waveguide that can be used as a straight guide or as a taper.
Asymmetric tapered waveguide
Tapered waveguide with shifted final center.
Bends
A conventional waveguide bend with arbitrary width and radius.
Pipe
Connector comprissing an arbitraty number of straight and bent waveguides, with arbitrary length, width and curve radius.
S-bend
A conventional waveguide, laid out as an S-bend.
Horn taper
A conventional waveguide, laid out as a tapered bend.
SWG waveguide
A SWG waveguide which can be used as a straight SWG guide or as a SWG taper.
SWG taper
A SWG taper transition from conventional to SWG waveguide.
